Holzimprägnierung
Colorless wood impregnation, solvent-based, for exterior use
Low-odour wood impregnation with excellent penetration properties. Equipped with film protection for surfaces susceptible to algae and fungi.
Areas of application
For renovations and initial treatment as an impregnation for exterior wooden components such as windows and shutters, soffits, half-timbering, facades, fences, wooden structures, etc. Wood impregnation significantly increases the durability of wooden structures.Labels
- Description
Low-odour wood impregnation with excellent penetration properties. Equipped with film protection for surfaces susceptible to algae and fungi.
- Characteristics
Delivery viscosity
Liquid
Density
Approx. 0.83 kg/l
Solid state
Approx. 10 %
Flash point
62 °C
Shades (stock shades)
ColourlessTintable
Not tintable
Storage life
Store in tightly closed original container for 1 year at 5 - 25°C.
Processing temperature
Do not process below + 5°C (object temperature), ideal temperature range 15 - 22°C.
Protect from direct sunlight.
Adhesive strength
Gt 0-1 (DIN EN ISO 2409)
Environmental label
FHighlight
Low odor wood impregnation
- Substrate / Processing
Substrates
The substrate must be clean and dry in accordance with the usual requirements. The wood moisture content must not exceed 15%. Depending on the quality of the wood and the construction, immersion times of several hours are required to ensure the deepest possible penetration. Weathered wood structure must be removed mechanically down to the sound wood structure.
Application
Brushing and rolling
Ready to brush, apply undiluted.
Dipping, use undiluted (cover dipping baths tightly when not in use).Drying
Dust-dry (TG1)
After approx. 5 - 7 hours
Reworkable
After approx. 24 hours
Drying depends on the relative humidity, the air and object temperature and the layer thickness. The data determined correspond to the standard conditions at 20°C room temperature and 65% relative humidity.
Coverage
7 – 11 m2/kg
The consumption depends on the type of application, the structure of the substrate and the layer thickness achieved. The values given are average figures from practical experience
Tool cleaning
Clean immediately and thoroughly with thinner (e. g. universal or cellulose thinner).
- Information
Hazard warnings
For further information see the corresponding EU safety data sheet.
Further information
The SMGV information sheets and the FSO guidelines must be observed.
Important
We recommend creating sample surfaces in advance for components such as doors, frames, etc.
- Quality and environment
With the environmental label, coating materials can be identified in a transparent and clear scheme according to environmental and health protection criteria, as well as suitability for suitability for use. The environmental label creates transparency for the builder, architect, planner and client. All products of Dold AG are classified in the category A to G.
Dold AG was founded on August 01, 1921 by Hans Dold in Wallisellen. Until Dold is still located at the same site and is one of the leading paint and varnish manufacturers in paint manufacturers in Switzerland. In Wallisellen, Dold AG develops and manufactures its innovative range of paints and varnishes for the construction painter as well as for industrial customers.
Swiss paint and varnish factory certified according to ISO 9001 / 14001 / 45001. Dold AG is one of the few one of the few paint and varnish factories which not only has its quality management, management, but also its environmental management system, as well as the occupational safety and health protection processes have been certified. These certifications are a clear commitment for Dold AG towards all its commitment to all its stakeholders.
Environmentally friendly products are a concern for DOLD. The foundation KMU Clima confirms Dold AG's contribution to voluntary climate protection. For this concern all direct emissions of CO2 in form of electricity, heating and mobility are compensated by DOLD to a reforestation project in Uruguay. This is a long-term contribution to climate protection and for the sake of the environment.
