Durocal 10

2-component polyurethane top coat, matt, solvent-based, for interior and exterior applications

Durocal 10 has outstanding weather resistance and resistance to fading. This top coat stands out for its excellent adhesion, hardness, abrasion resistance and durability. Rapid surface and through drying enable users to work cost-effectively. Once hard, the coating offers high mechanical and chemical resistance. Hardening relies on an aliphatic isocyanate. Durocal 10 is characterised by very low overspray formation.


Areas of application

For painting commercial vehicles, plant and machinery, metal façades and metal structures. Furthermore, it can be used to paint doors or kitchen unit fronts. Durocal system paint is perfectly formulated for matching a large range of IGP powder coatings.

Labels

  • Description

    Durocal 10 has outstanding weather resistance and resistance to fading. This top coat stands out for its excellent adhesion, hardness, abrasion resistance and durability. Rapid surface and through drying enable users to work cost-effectively. Once hard, the coating offers high mechanical and chemical resistance. Hardening relies on an aliphatic isocyanate. Durocal 10 is characterised by very low overspray formation.

  • Characteristics

    Delivery viscosity

    Pasty (stir well before use)

    Density

    Approx. 1.3 kg/l

    Solid state

    Comp. A; Approx. 60% (white)
    Mixed: Approx. 60% (white)

    Texture

    Smooth

    Mixing ratio

    4 : 1 by weight

    8 : 1 by weight (Durocal Rollhärter)

    Please refer to the “Information/Important” chapter.

    Temperature resistance

    Constant exposure:

    130 °C

    Short-term exposure:

    160 °C

    Pot life

    Approx. 4 h (undiluted)

    Gloss level

    Matt

    Flash point

    35 °C

    Tintable

    Can be tinted according to RAL, NCS or sample with Spaceline system, manual tinting up to max. 3% possible with suitable universal tinting pastes

    Storage life

    Store in well-sealed original container for 2 years at 5 - 25°C.

    Processing temperature

    Do not process below + 5°C (object temperature), ideal temperature range 15 - 22°C.

    Protect from direct sunlight.

    Environmental label

    G

    Highlight

    2-component acrylic polyurethane-based top coat

  • Substrate / Processing

    Substrates

    The substrate must be prepared according to the usual requirements: free from rust, grease, oil and scale, as well as clean and dry. Depending on the type of substrate (metal, wood, plastic), suitable pre-treatment or primer coating is necessary.

    Application

    Spray application, can be diluted with 10–20% cellulose thinner, universal thinner or Durocal thinner.

    The spray pattern and the colour of effect colours (metallic, pearl) are significantly influenced by the application conditions:

    1. Nozzle width of the spray gun and spraying pressure:
    Atomisation is finer with a smaller nozzle width and a higher spray pressure. Consequently, the colour becomes lighter.
    2. Dilution and spray viscosity:
    A dilution that evaporates more quickly often leads to an increase in the brilliance of the metallic effect. The tendency towards cloud formation increases with the viscosity.
    3. Spray method:
    Dry spraying or heavy misting: The colour appears lighter and more metallic. Wet spraying: The colour appears fuller and darker. Cloud formation is prevented by incorporating intermediate flash-off times.
    4. Spray gun distance:
    Short distance: The sprayed film is wetter, the colour is darker and more intensive. Greater distance: The sprayed film is drier, the colour is lighter and more metallic.

    Drying

    Dust-dry (TG1)

    After approx. 30 minutes

    Touch-dry (TG4)

    After approx. 8 hours

    Reworkable

    After approx. 2 - 3 hours

    Fully dried

    After approx. 8 days

    The drying time depends on the relative air humidity, air and object temperatures and coating thickness. The data was determined for standard conditions at 20°C room temperature and 65% relative humidity.
    The hardening of the film can be greatly accelerated by raising the temperature (30–90 minutes at 60–85°C) (it is essential to observe a flash-off time of at least 20 minutes).

    Coverage

    8 – 10 m2/kg

    Consumption depends on the application method, the texture of the substrate and the coating thickness. The stated values are average figures from practice.

    Tool cleaning

    Clean immediately and thoroughly with thinner (e. g. universal or cellulose thinner).

  • Information

    Hazard warnings

    For further information see the corresponding EU safety data sheet.

    Further information

    The SMGV information sheets and the FSO guidelines must be observed.

    Important

    • Compatible with roller-applied hardener: Durocal 50
    • Compatible with roller-applied hardener to an extent: Durocal 10/30/70/90 (watch out for streaks and spots)
    • Not compatible with roller-applied hardener: Durocal 30 Struktur / Durocal 70 Struktur
    • Electrostatically processable
    • Temperature resistance short-term exposure 160°: optical changes can also occur at lower temperatures. However, functionality is still guaranteed.
  • Quality and environment

    The Spaceline tinting system is the ideal colour mixing solution for today’s needs. It cuts your costs for expensive storage and gives you new flexibility of supply. Spaceline paint concentrates are universal colour pastes with high-quality pigmentation. You can use them to produce RAL, NCS, IGP and many other colours with the DOLD Spaceline tinting system.

    System coatings for coordinated surfaces in terms of colour, gloss, effect and texture.This is made possible by DOLD's wet paint expertise and IGP's powder coating expertise. In many areas of application, adjacent components of an object are made up of materials that are produced by different suppliers and finished by different coaters. In such cases, system coatings from DOLD and IGP create colour consistency and aesthetics. Comprehensive coating solutions from a single source - advice and service included.

    With the environmental label, coating materials can be identified in a transparent and clear scheme according to environmental and health protection criteria, as well as suitability for suitability for use. The environmental label creates transparency for the builder, architect, planner and client. All products of Dold AG are classified in the category A to G.

    Dold AG was founded on August 01, 1921 by Hans Dold in Wallisellen. Until Dold is still located at the same site and is one of the leading paint and varnish manufacturers in paint manufacturers in Switzerland. In Wallisellen, Dold AG develops and manufactures its innovative range of paints and varnishes for the construction painter as well as for industrial customers.

    Swiss paint and varnish factory certified according to ISO 9001 / 14001 / 45001. Dold AG is one of the few one of the few paint and varnish factories which not only has its quality management, management, but also its environmental management system, as well as the occupational safety and health protection processes have been certified. These certifications are a clear commitment for Dold AG towards all its commitment to all its stakeholders.

    Environmentally friendly products are a concern for DOLD. The foundation KMU Clima confirms Dold AG's contribution to voluntary climate protection. For this concern all direct emissions of CO2 in form of electricity, heating and mobility are compensated by DOLD to a reforestation project in Uruguay. This is a long-term contribution to climate protection and for the sake of the environment.

Technical Datasheet

Downloads

Download product documentation here.
Free of charge and without obligation.